Freeze-Ease PRO
When faced with a seized component, excessive force can often lead to more problems than solutions. Breaking a bolt or attempting to unscrew a heavily corroded nut might not always be catastrophic, but dealing with a snapped spark plug, fuel injector, or glow plug can be both costly and time-consuming.
DC Lubricants presents a chemical approach to address this challenge. Our Freeze-Ease Pro is engineered to dissolve the robust connection between the threads of components and the cylinder head. We leverage scientific principles and advanced lubrication, rather than physical force, to resolve such issues.
How it works:
- Temperature Contraction: The Freeze-Ease Pro rapidly chills the applied area to -40 degrees Celsius. This sudden temperature change promotes micro-cracking, effectively breaking apart the fused surfaces.
- PTFE-Based Lubricant: Our formula includes a powerful PTFE-based lubricant. This reduces stress on the component during extraction by minimizing friction.
- Corrosion Inhibitor Additive: Extra benefits come from our potent corrosion inhibitor additive. Plus, our composition is free from acids and silicone.
Directions:
- Prepare the Area: Ensure the work area is clean and free from corrosion flakes. Disconnect any electrical wiring if possible and pre-clean the surface with a wire brush.
- Shake the Aerosol: Vigorously shake the 500ml DC Lubricants Freeze-Ease Pro aerosol for at least two minutes.
- Apply Precisely: Use the precision nozzle to direct the spray at the desired component. Note the chilling effect but avoid touching the area with bare skin to prevent frostbite.
- Weakening the Bond: Allow some time for the product to weaken the corrosion bond. You may need to repeat the application.
- Breakaway Torque: Once the bond has loosened, use appropriate tools to apply sufficient breakaway torque. Be cautious not to apply excessive force to avoid component breakage.
- Unscrewing the Part: If necessary, turn the component both clockwise and anti-clockwise to further free the bond and reduce friction between the threads.
- Thread Cleaning: Consider cleaning the threads with a suitable tool before refitting the component.
- Anti-Corrosion Film: Our Freeze-Ease Pro leaves an anti-corrosion film, protecting the exposed threads from oxidation until the part is replaced.
Remember, while our product aids removal, it doesn’t guarantee against breakage if excessive force is applied afterward. Use pullers judiciously and follow the steps carefully for successful results.
