MAHLE OzonePRO Ozone Generator/Sanitiser

OzonePRO is the professional sanitising system for your workshop. 

For you and your customers' health!

  • Easy to use, safe and 100% environment-friendly
  • Fully automatic
  • For Car/Truck/Bus interiors
  • To sanitise your workplace/office/reception
  • Ideal solution for hotels and shops
  • Smells of all kinds
  • Tobacco smoke
  • Pollens and other allergens.

Multifunction Sensor

  • Ozone
  • Humidity Sensor
  • Tempurature
  • Barometric pressure

The system also eliminates bad odour caused by bacteria, fungi and moulds lurking in the vehicle interior

OzonePRO offers an intelligent procedure for consistent results. As the sanitising process is entirely guided by the special software: through the sensor, it analyses the concentration rate of the gas fed into the vehicle interior until the ideal threshold is reached, maintaining its level throughout the time needed for sterilisation to be achieved, through a specific strategy based on the type of vehicle and its inner condition.

Why is sanitation of the vehicle cabin so important?

Viruses, bacteria and moulds can lurk in upholstery and A/C circuit of any vehicles entering your workshop. For your safety, and for the safety of your employees and customers, a thorough sanitation of the vehicle interior is recommended and more valid than ever before.

Ozone  (O3), widely used to disinfect sanitary facilities, makes viruses that may be found on surfaces inert, while sterilizing the vehicle interior to remove moulds and bacteria.

Recognized as a natural disinfectant, Ozone offers a wide range of applications: its sanitizing action can be applied to air, water, surfaces and fabrics.

Why choose Ozone?

Ozone is a natural gas, widely used in sanitary facilities due to its ability to oxidize and disrupt the molecular structure of bacteria, fungi and viruses.

Every single molecule of Ozone (O3) is generated in nature through electric dis-charge by separating some molecules of Oxygen (O2) into single molecules of atomic Oxygen (O1), a new 3-atom mole-cule can be formed.

The new molecule is actually short-lived: in fact, Ozone decays rapidly, breaking down into oxygen just a few minutes later.

OzonePRO from MAHLE applies the same technology to its own processes.
Through Corona Effect ceramic plates, Ozone is generated and pushed into the environment, according to the sanitizing procedure parameters. This technology allows us to generate large quantities of ozone in a short time.

This helps to reach the required level of saturation rapidly, thus greatly increasing efficiency com-pared to other existing systems.

The Sensor 

The special built-in sensor plays a key role. By analysing several environmental parameters, it enables the software to only maintain saturation as long as necessary to ensure elimination of path-ogens, while adapting operation to the detected parameters, thus avoiding any oxidation damage inside the vehicle or in the treated environment.


around the world recognize the use of ozone as a disinfecting agent and disinfectant in the treatment of air and water: a natural way to sterilize areas contaminated with bacteria, viruses, spores, moulds and mites.

OzonePRO, always ready for use!

The system is made up of a high-capacity (5,000 mg/h) portable Ozone Generator, integrated with the exclusive Multifunction Sensor, at the core of the system, which analyses, calculates and guides all the sani-tizing operations.

Extremely handy, it can be used inside the vehicle cabin, thanks to the specific 12V socket to be connected to the cigarette lighter socket.

Setting a time is not enough! 

Every environment has different require-ments of how long and with how much ozone it should be handled, depending on the specific volume of air, temper-ature and humidity, interiors' com-position and level of cleaning.

Time should only be considered once the proper saturation level has been reached in the environment.
This task is handled by the special Mul-tifunction Sensor, which in fact controls every step of the sanitizing process based on the evolution of the vehicle's environmental and internal parameters.

Control over the sanitizing procedure en-sured by OzonePRO prevents all those circumstances that may jeopardize the final result: excessive ozone persistence, failure to reach proper saturation or inad-equate saturation times.

MAHLE expertise

The design and engineering of functional logics ensuring perfect sanitation have been obtained thanks to the extensive expertise of MAHLE, global leader in the manufacture of automotive filtration systems.

Manufacturer: MAHLE
Availability: In stock
Ship to
Shipping Method
Estimated Delivery
No shipping options
Product tags